Tools for 33 mm water taps

Here you will find a tool to make it easier to access and loosen and tighten the nut for your water tap. When it is cramped and awkward to reach by hand, this helps you access it much easier by acting as an extender. Works for both short and long connections on the tap. see pictures. The tool can be turned to change the size of the hole from the tap for the short connections. Only fits plastic nuts for 33 mm taps. (33 mm mounting hole) Instructions: 1. Disconnect all hoses and electrical cables from your tap 2. Pass hoses and electrical cables through the tool. 3. Position the tool so that the nut jumps "into place" in the tool. 3.2 If you have short hose connections on your tap, ensure that these point out of the hole in the tool. You can then turn it a bit and then reposition the tool. 4. Tighten / loosen the nut. Please make sure there is no pipe or similar that will prevent the tool from fitting before you buy it. Dimensions: Inside: 38 mm Outside: 45 mm Height: 85 mm Tool for 33 mm water taps E-VERKTYGKRAN33