Support leg AL-KO clickfix 320-440 mm

Support legs for mounting at the rear of motorhomes with AL-KO AMC chassis or original frames in combination with AL-KO frame extensions. The support legs are easily cranked up and down manually and provide a significant improvement in stability. Already during the first turn of the crank, the leg falls into a vertical position and begins to extend. Conversely, the leg swings up directly on the last turn and automatically locks in the raised position with a click. You do not need to use significant force or do anything extra to secure the leg. If you forget to crank the legs up before starting, the legs fold automatically, either forwards or backwards depending on the direction of travel. All AMC chassis and frame extensions manufactured from Aug. 1995 are equipped with pre-drilled holes, which makes installation very easy - 2 screws per side are all that is needed. On some cars, it may be easier to drill holes in the skirt to make it easier to access the support leg crank. A durable rubber grommet is available as an extra accessory. The support leg consists of a hot-dip galvanised inner tube / chromated outer tube. The support legs may not be used as a jack. Max static load capacity is 1000 kg per support leg. The support legs have a long screw connection for the support leg crank and are Supplied as a pair Excludes support leg crank. Motorhome support legs for AL-KO chassis and frame extensions. B = Frame height with loaded car (ground-top edge of frame): 320-440 mm. A = Adjustment height: 297-464 mm. L = 382 mm. KA-C04-24A KA-C04-34B